RSS Feed

Category Archives: crafting

Baby Shower Hiatus

Posted on
Baby Shower Hiatus

So I haven’t posted much in the past few weeks, I know. I have been planning, planning, planning for a baby shower for my lovely sister-in-law, and now that it’s finally over, I’ll share what all I was up to.

My inspiration for the shower came from these adorable little bags. What a cute little saying! So I was off and running.

Now I’m not graphic designer, I must say. But my wonderful husband is pretty handy with Adobe Creative Suite and was willing to lend me a hand with some designs. He designed some adorable invitations for me (which I forgot to take a picture of), as well as all of the game cards, etc. But we’ll get to those later. My first creation was a banner  made with my Cricut. I love that thing.

Image

The color scheme I chose was black and white and a turquoise-ish blue. Nice and boyish but classy and elegant. That window where I hung the banner is right behind the table in my dining room. It looked a little bare hanging up there all by itself, though. So I decided to make some large pom-poms from tissue paper. I love how these turned out.

Image

It was really hard to get a decent picture right in front of that window. Especially since the sun was actually shining that morning! Woo hoo! We take all of the sun we can get at this time of year in the Pacific Northwest. Anyways, these things were so easy to make and they looked just perfect hanging on either side of the banner. All I did was take an entire pack of tissue paper (on sale for $.99 a pack at Target) and accordion fold all of the sheets together. Then I cut a little notch in the center and tied them with a twisty tie. I rounded off the ends to give it a flowery kind of look, and then fluff them up. Easy peasy. I tied a nice turquoise ribbon to them and tacked them to the ceiling with some cute black and white thumb tacks.

You might have noticed the tops of some other tissue paper puffs in that last picture. Well, I made those to go in the vases that I painted. Yep, I painted some vases. After seeing this post on Pinterest, I knew I had to try it. So what better reason than baby shower decor?? I found a couple of vases at the thrift store for a dollar a pop. Can’t beat that! So I set to work. They turned out beautifully, I think.

Image

In my last post, I shared how I made pinwheels for the shower. Well, I got them all finished and strung together and hung them across the mantle.

Image

Image

Our dining room has a pass through window to the kitchen, so I decided to hang a little divider up. Something decorative but that might hide a little bit of the prep mess in the kitchen. I punched circles out of black, white, and turquoise cardstock. I then strung them together using black yarn and hung them in the pass through window. Nothing to it!

Image

Now for the food. I was in charge of dessert. My wonderful sister-in-law (not the one having the baby, obviously) made all of the food, food. And she did an AMAZING job. Wonderful chicken salad sandwiches, a delicious green salad with blueberries and a yummy raspberry vinaigrette, and  a fabulous pasta salad. I fear my desserts weren’t quite as impressive. I made cupcakes. See? Not fancy at all. But I did chocolate and vanilla with chocolate and vanilla frosting to stick with the black and white theme. I also made cake balls, as pictured above. Those are my absolute fave. Sooooooo yummy! And then I did a milk and cookie display with Oreos. So cute!

Look at the fabulous cupcake toppers my lovely hubby made. Aren’t they adorable? They even have baby’s name around the edge as well as the “Happiness is a Peanut” saying.

I must say, I adore that cupcake stand. It’s just plain white plastic so I can customize it however I like with a simple ribbon. Perfection!

Okay, one more foodie thing, and then I’ll get to the games. I wanted to do lemonade but I somehow don’t own a decent pitcher. Mine are all plastic things that aren’t pretty in the least. But I do own a lovely set of mason jars that I bought for my son’s birthday party. So I poured the lemonade up into them and put them into a bucket full of ice. Cold drinks all set to go!

Now for the rest of the shower stuff. I am one of those people who actually hate baby shower games. Like, really hate baby shower games. But it’s one of those things that must be done, I suppose. So I tried to find a few activities that were has painless as possible for everyone involved. So I set a table up by the front door so that people would see it when they came in. On it was a big vase filled with peanuts and a cute little sign asking, “How many peanuts do you see?” Simple, right? Make a guess and you might win a prize! In fact, the winner took home a little Starbucks gift card.

Also on the front table was a little “Wishes for Baby” card that everyone filled out. Nothing to this one but fill it out and drop it in the box for the mama to read later.

The last game we played was a baby version of “The Price is Right.” I bought a few baby items at the store and kept track of the price of each (pre-tax). I then set them all up and passed out a game card to each person. As I showed them the items, they wrote down how much they thought it cost. At the end, they totaled up their prices and who ever came the closest to the actual total won a prize! Which just happened to be another Starbucks gift card.

Didn’t J do a great job with all of the graphics? I was impressed, anyways. The last thing I did was bake some yummy peanut butter cookies to put in my adorable “Happiness is a Peanut” bags as a little parting gift. Everyone took one on their way out the door.

So that was our party. Lots of fun and I really enjoyed putting it all together. Now I can’t wait to meet the little man it was all for!

Pinwheel, pinwheel spinning around….

Posted on
Pinwheel, pinwheel spinning around….

I have that stupid song stuck in my head. You remember the 80’s Nickelodeon show? This one? Yep, stuck in my head. Why, you ask? Because I’m making pinwheels. Yep. Pinwheels. I’m hosting a baby shower for my sister-in-law next weekend and I’m working on some of the decorations. I’ve seen these paper pinwheels all over Etsy and decided to give it a go. They’re turning out pretty cute, so I thought I’d do a post about them.

They’re actually pretty easy to make. They’d be even easier if I had double-sided paper. But I don’t. So I’m basically making some by gluing two sheets together. Fun times.

So, here’s what you do.

Start with two sheets of 12×12 scrap booking paper of what ever color/design you like. My color scheme is black and white and turquoise.

I then folded each sheet into fourths creating four smaller squares, and cut them out.

Now glue them together. Woohoo! (I cut them into smaller squares before gluing because I was afraid of not having enough glue to hold the edges in place if I glued them first.)

Now the fun begins. Grab your scissors and cut from each corner in towards the center.

At this point, I warmed up my glue gun. I put a little dab in the center of my paper and started folding and gluing.

Now find something to glue in the center to hide where they all came together. I used a fun glittery button on this one.

Here are some of the others.

My plan is to make them into a garland to string across my mantle. I plan to punch small holes in the top two corners and run a hemp cord through them. I’ll definitely post pictures when I get it all finished!

Play Stroller Re-do

Posted on
Play Stroller Re-do

The Little Monkey got this doll stroller for her birthday last year. She loved it. Pushed it around constantly. Then the big kids got a hold of it. And they thought it would be fun to sit in. Well, let’s just say that it’s not build for a 3 and 4 year old to sit in. The seat cover was pretty much torn to pieces. So I decided, why not just make her a new cover for it? I found this fabric while digging through a box in the garage that I had completely forgotten that I bought. I bought it years ago to make something for my niece (which I obviously never got around to doing). It’s this precious Peter Rabbit print that I just adore. So I had a mission. Stroller re-do.

First, I deconstructed the stroller. Pulled the cover, basket, and canopy off.

Before the canopy came off.

Basically all there was to this thing was a layer of fabric with a bias tape trim. Nothing terribly difficult. I reused some of the pieces from the original stroller, like the seat buckles and straps and the little mesh pieces from the basket (mostly because I didn’t have anything else to use at my house already. Why leave the house if I didn’t have to?). So I took the deconstructed pieces, pinned them to my fabric, and cut them out.

         You get the idea.

At this point, I pinned the bias tape around the seat cover (being sure to stick the buckle/strap pieces in where needed) and sewed it on.

Then I folded it into a “seat” shape, pinned it in place, and sewed it down.

   As you can see by the lighting, we hit night time!

Next I worked on the basket that fits under the stroller. This part was a little trickier, mostly because of the shape I had to sew it into. It was just a bit fiddly, trying to work it on the machine.

The original basket had this hard cardboard piece in the bottom of it, so I reused that. I just sewed it between two layers of fabric.

The cardboard piece is in there. Promise!

This is when I had to attach the mesh pieces I reused from the original stroller.

Here was where I had to do a little experimenting to see how I needed to fold it, etc. to get it to line up correctly. But in it the end, it wasn’t too difficult.

Now the original stroller used snaps to attach the basket to the underneath bar. But I don’t have a fancy snap press. Or even pliers. So I just used good ol’ velcro.

And all attached.    

Now it was time to do the canopy. I cut the pieces just as like the original, then pinned everything into place, and sewed.

On the original, they must have sewed the canopy into place before they assembled everything, because unless I wanted to sew it on by hand (and I didn’t!) there was no way to do it how it had been originally done. So I improvised. I attached some velcro again. Three little spots on the small fabric flap and their coordinating pieces on the actual canopy. Then I strapped it on.

I think it turned out pretty well!

And the sleepy Little Monkey was thrilled to have her stroller back in working condition this morning!

The Funny Bunny

Posted on
The Funny Bunny

With Easter coming up, I decided I wanted to make something for the kids. And since I’ve been on a sewing kick lately, I thought I why not sew them a little plush lovey of some sort. Well, I had a little bit of the stripe fabric I used on the bottom of this dress. And it was one of my absolute favorite prints when Monkey Man was a baby. He had cloth diapers in that print, a shirt, some slippers, and even a pair of knit shorts. So it only seemed right that he get something made out of my last scraps of the fabric. I didn’t have much left, only about 2 9″x9″ squares and a few other scraps, so it couldn’t be anything too elaborate. So this is what I did. I decided to make a bunny. First, I sketched out a general pattern for the body of the bunny.

I pinned it to both layers of my fabric and cut them out together. Then I pinned them together, wrong sides facing.

And sewed around the edges leaving the top of his head open and flipped it right side out. Look how silly it is!

And stuffed him full.

Then I made him some ears. I cut out two pieces of my striped fabric and two pieces of a coordinating solid I had on hand.

I pinned one striped piece to a solid piece, wrong sides facing, and sewed them together. Then I flipped them right side out and did a little gather at the base.

At this point I hand stitched the ears in place and then sewed his head closed. By this point I was fed up with the incredibly thin, flimsy striped fabric and I just threw it back on my machine to finish, not caring what the top of his head looked like. If you read my post about the t-shirt dress, you’ll remember me ranting about this fabric then, too. It’s impossible for a fairly inexperienced sewer like myself to work with. (I can’t say that I’m really sorry that it’s all gone!) Needless to say, if I wanted it to look a bit nicer, I would have finished it up by hand. I figure that’s what I’ll do on the next one I make for the Little Monkey. At this point, I stitched little eyes and a nose on him using embroidery floss. Seeing how I have never embroidered a thing in my life, I just kind of winged it until they looked decent. Any way, here he is. The Funny Bunny, as he’s become known around our house.

I went ahead and showed him to Monkey Man, mostly because he saw me finishing it up when he got home from preschool today. It made me super happy when he saw it and asked hopefully if it was for him. I think he’s in love.

Is it terribly mean that I took it and put it away a little while after this? Maybe. But it’ll make for a super Easter gift!

T-shirt Upcycle

Posted on
T-shirt Upcycle

I saw this on Pinterest recently and knew I had to make one. When I first showed the picture to my husband, he kind of turned up his nose, which gave me pause for a moment. But I found myself at a thrift store a few days later and decided to pick up some supplies and give it a whirl anyways. I found a t-shirt for around $1 and a coordinating tie for about $2. The most expensive thing was the button. My husband couldn’t believe it was $4.50! So all said, I got a cute shirt for about $7.50. Not bad, in my book.

First, I took my t-shirt and pinned the tie in place.

The tie was significantly longer than the neckline of my shirt, so I just let the tail hang down low and figured I’d cut it off later.

Then I sewed it into place. Once I decided I was happy with the placement and ruffles, etc., I cut off the excess length and zig-zagged the raw edge.

Now it was time to attach the button.

After seeing it on, my husband decided he likes it. Yay! I might just have to hit up the thrift store for some more shirts and ties. This was so easy and fun to do, and I loved the way it turned out!